Retain a camera on Ford OEM Sync 2 and 3 systems (CODING REQUIRED)

Retention camera interface allowing you to retain/ keep the factory OEM fitted reverse view camera on select Ford vehicles with SYNC 2 (8 Inch) or SYNC 3 systems.

When fitting an aftermarket head unit, this t-harness cable uses a 54 pin connector which connects to the back of the vehicles OEM SYNC system to retain the original reverse view camera on the screen.

PLEASE NOTE: Vehicle Coding is required with Forscan to enable RVC function on Sync systems

If you are unsure of which version of SYNC you have then please see our guide to identifying SYNC and which camera interface to use

Brand: InCarTec

Car models: The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Ford - EcoSport 2nd Gen (2013 - 2019)
Ford - Edge (CD539) (2015 - 2021)
Ford - Endura (2018 - 2020)
Ford - Fiesta Mk7 (2008 - 2010)
Ford - Fiesta MK7 (2010 - 2012)
Ford - Fiesta MK7 Facelift (2012 - 2018)
Ford - Fiesta Mk8 (2017 - 2023)
Ford - Focus Mk3 (C346) (2011 - 2015)
Ford - Focus MK3 Facelift (2015 - 2018)
Ford - Focus MK4 * (2018 >)
Ford - Galaxy MK4 (CD390) (2015 - 2023)
Ford - Kuga 2nd Gen (C520) (2013 - 2019)
Ford - Mondeo MK5 * (2014 - 2022)
Ford - Mustang 5th Gen Facelift (2011 - 2014)
Ford - Mustang 6th Gen (S550) * (2015 >)
Ford - Puma (Crossover) (2019 >)
Ford - Ranger 3rd Gen Facelift (2015 - 2022)
Ford - Transit Connect MK2 (2014 - 2019)
Ford - Transit Connect MK2 Facelift (2018 >)
Ford - Transit Custom MK1 (2013 - 2018)
Ford - Transit Custom MK1 Facelift (2018 >)
Ford - Transit MK8 (2013-2018)
Ford - Transit MK8 Facelift (2018 >)